Safety Snapshot: Drop-Starting Chain Saws

An example of drop-starting a chain saw. Photo courtesy of edojob/AdobeStock.
Accreditation audits are more than a checklist exercise – they’re a window into how safety practices hold up in the real world. Out in the field, small oversights can quickly become serious risks.
In this recurring department, auditors will share trends and observations from job sites across the country – practical reminders of where crews are getting it right and where vigilance is needed. Each installment will highlight real-world issues, explain why they matter and reinforce the best practices that protect crews, companies and the public.
In this Safety Snapshot, the auditor looks at the improper practice of drop-starting chain saws.
What auditors are noticing
Auditors are noticing working arborists drop-starting chain saws, particularly when working from a bucket aloft.
Best practices
When starting on the ground, using a ground start or leg-lock position will prevent drop-starting. When starting aloft, you can use a branch or the bucket rail, or maintain a locked elbow to prevent drop-starting.

Dustin Goodman of TXK out of Texarkana, Texas, demonstrates three acceptable methods for starting a saw. From left to right: The leg clamp, on the ground with knee bent and on the ground standing.
A practical reminder for crews
Talk to your crew leader/supervisor/company owner to find the starting position that works for you, follows Z133 safety standards and is approved by your company.
This will keep you safe in the field and extend the life of your saw.
Conclusion
One of the things that separates professionals from homeowners is following safety guidelines. Professionals should always start their saws in a safe, controlled manner.
Rebecca Johnson, QT, is founder and owner of Arborholic LLC, is a TCIA Accreditation Auditor and serves on the TCI Magazine Editorial Advisory Committee.
TCIA Tips with Arborist Andy
How to Not Drop-Start While Aloft
Starting a chain saw while aloft requires attention to positioning, stability and safety. Here are six tips to help climbers avoid drop-starting and safely start a saw in the tree or from a bucket.
Warm up the saw before tying it onto the climbing line. This helps the climber start the saw with fewer pulls while in the tree.- Ensure the chain brake is engaged. Use two tie-ins.
- With a top-handled saw, place the body of the saw against your right leg. Hold the saw by the throttle handle with your right hand, keeping your arm straight and elbow locked.
- Pull the T-grip/pull cord with your left hand.
- It can help to envision a triangle, with the three sides being the tree, climbing line and climber’s lanyard. Position the saw and, most important, the bar and chain outside the triangle. This usually involves twisting to the right.
- When in a bucket, starting a saw is very similar to starting one while climbing. With the chain brake engaged, brace the saw against the outside of the bucket instead of your leg. The rest is the same: right hand on the top handle, right arm straight and elbow locked and left hand on the T-grip/pull cord. Pull to start.
Andy King is TCIA’s manager of tree care expertise.



